Audio Control; Subwoofer Output; Tel Mute; Srs Wow Select - Kenwood DPX-MP5070 Instruction Manual

General features

Audio Control

1
Enter the Audio Control mode
Press the [AUDIO] button for at least 1
second.
"Audio CTRL" is displayed.
2
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item Display
Balance "Balance"
Fader "Fader"
Sub woofer level*¹ "SW Level"
Bass boost level*² "Amp Bass" Flat/+6/ +12/ +18 (dB)
Central frequency boost*² "Amp Freq" Normal/ Low
Low Pass Filter*¹ "LPF"
Volume offset "V-Offset"
• *¹ You can control this item when 'Subwoofer Output'
(page 10) is set to "Sub-W On".
• Volume offset: Each source's volume can be set as a
difference from the basic volume.
• *² Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• *² For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "Amp Bass +18" won't work
correctly even if it's selected.
4
Exit the Audio Control mode
Press the [AUDIO] button.

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Press the [AM] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it's ON, "Sub-W On" is displayed.
• You can control this function when 'Switching preout'
(page 24) is set to "SWPRE Sub-W".
10
|
English

TEL Mute

The audio system automatically mutes when a
call comes in.
When a call comes in
Listening to the audio during a call
When the call ends
Range
Left 15 — Right 15
Rear 15 — Front 15
–15 — +15
Through/120/80/50 Hz

SRS WOW Select

–8 — ±0
You can play back adding gorgeous heavy bass to
the sound and making a 3D sound field.
1
2
"CALL" is displayed.
The audio system pauses.
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
Enter the WOW Select mode
Press the [WOW] button.
"WOW Select" is displayed.
Select the WOW item
Press the [WOW] button.
Each time the button is pressed, the SRS WOW
Select switch as shown below:
SRS WOW
Moves the sound image up a notch and adjusts
bass and the sound field.
Moves the sound image up two notches and
adjusts bass and the sound field.
Changes to the value set in 'SRS WOW Control' .
Returns to the normal sound without SRS WOW. "Off"
• When operation stops for 3 seconds, the SRS WOW
Select closes.
• WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
SRS WOW SRS FOCUS
High High
Low Low
Off Off
Display
"Low"
"High"
"User"
SRS TruBass SRS 3D
On On
On On
Off Off