Connecting Power; Connecting An Antenna Or Cable Tv Without A Cable Box; Connecting A Cable Or Satellite Tv Box - Insignia NS-32L430A11 User Manual

Insignia 32" LCD TV 720p

Connecting power

Notes
• Your TV only works on 120 V, 60 Hz power.
• Your TV should only be operated from the
power source indicated on the label.
• Always unplug the AC power cord from the AC
power outlet when you will not be using your
TV for an extended period of time.
To connect power:
• Connect the power cord to the AC IN connector
on the back of your TV, then plug the cord into an
AC power outlet.
Connecting an antenna or cable TV without a
cable box
To connect an antenna or cable TV without a
cable box:
• Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV and to
the antenna or cable TV wall jack.
Notes
• Use a 75 ohm cable to eliminate interference
and noise from radio waves.
• Do not bundle the 75 ohm cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.

Connecting a cable or satellite TV box

Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available.
Connection type
To connect a cable or satellite TV box:
1 Connect the incoming cable from the cable wall
2 Depending on the jacks available on the cable
www.insigniaproducts.com
Video quality
HDMI
Best
Component
Better than composite or coaxial
Composite
Better than coaxial
Coaxial
Good
jack to the cable-in jack on the cable box.
Use one of the following connection types to
connect the cable or satellite TV box:
• HDMI (best)
• Component video: (better than composite
video)
• Composite video (better than coaxial)
or satellite TV box, connect a video cable from
the outgoing jacks on the cable or satellite TV
box to the corresponding jacks on the back of
your TV. The connection can be to an HDMI jack,
the COMPONENT IN/Y, P
B
AV IN VIDEO (composite) jack.
, P jacks, or the
R
13