Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-32L430A11 User Manual

Insignia 32" LCD TV 720p
# Item Description
Press to list all the recorded programs in a PVR/STB.
You need to program the remote control before this
27 button works. For more information, see
PVR/LIST
"Programming your universal Insignia remote control"
on page 8.
Press to fast forward on DVD, DVR, PVR, or CD devices.
You need to program the remote control before this
28
button works. For more information, see
(forward)
"Programming your universal Insignia remote control"
on page 8.
Press to skip to the next chapter or track on DVD, DVR,
PVR, or CD devices. You need to program the remote
29
control before this button works. For more
/ (skip forward)
information, see "Programming your universal
Insignia remote control" on page 8.
Press to pause playback on DVD, DVR, PVR, or CD
devices. You need to program the remote control
30 before this button works. For more information, see
/FREEZE
"Programming your universal Insignia remote control"
on page 8.
Press to go to the next or previous channel in the
31 channel list. For more information, see "Selecting a
CH /CH
channel" on page 19.
Press to mute the sound. Press again to restore the
32
MUTE
sound.
Press to enter a digital sub-channel number. For more
33
—
information, see "Selecting a channel" on page 19.
Press to turn closed captioning on or off. You can select
34
CC Off, CC On, or CC On Mute. For more information,
CCD
see "Turning closed captioning on or off" on page 31.
If Parental Lock is turned on, when you enter the
35 correct password to unblock the channels, you can
P-LOCK
press this button to block the channels again.
Press to select the aspect ratio. For more information,
36
ZOOM
see "Selecting the aspect ratio" on page 21.
Press to select the video mode. You can select Vivid,
Standard, Energy Savings, Theater, Sports, or
37
PICT
Custom. For more information, see "Adjusting the TV
picture" on page 20.

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the cover release latch on the
back of the remote control, lift the cover off the
remote control.
2 Insert two AA batteries into the battery
compartment. Make sure the + and – symbols
on the batteries align with the + and – symbols
inside the battery compartment.
3 Replace the cover.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV. The remote control
should be used within 26 feet (7.9 m) of your TV.
www.insigniaproducts.com
Warnings
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
7