Table of Contents
Advertisement
2. The Regional Settings Properties setup procedure is complete.
REGISTRIES SAVE/RESTORE SETUP
1. Double-click Registries Save/Restore; Registries Save/Restore window displays three tabs:
• Save Current Settings: Select this tab to be able to save current device settings manually. The S7350B performs this
task automatically at several key events including Sleep mode entry and Power Off. Major settings, e.g., wireless and
calibration, may be saved as they are changed. This feature allows user to save all settings outside of the criteria for
automatic processing. Click OK.
• Default Settings: Select this tab to be able to reset the system to its default factory settings. This is a simple means of
resetting the device parameters for a new user, new environment, or when the system encounters unexpected or hung
states through aggressive usage patterns. This feature may be password-protected. Click OK.
• Backup/Restore Setting: Select this tab to be able to backup or restore saved settings for the S7350B. This may be
applicable where environment and user are subject to change. Click OK.
2. The Registries Save/Restore setup procedure is complete.
STORAGE MANAGER SETUP
1. Double-click Storage Manager; Storage Properties window displays.
2. The information provided pertains to the internal flash memory (DSK1) and the associated partitions. (Part00 - for device
software and Part01 for persistent storage). The typical user will not find the need to configure or manipulate the informa-
tion presented by this utility.
STYLUS AND CALIBRATION SETUP
1. Double-click Stylus; Stylus Properties window displays.
2. Test Double-Tap function by following the instructions to double click the two squares on the right; if correct, click OK.
3. To recalibrate or if your device is not responding to your taps, click Recalibrate to adjust; when done, click OK.
4. The Stylus Setup procedure is complete.
NOTE: The re-calibration of the touch display and cursor positioning can be activated by pressing on both the K and Email (left
two buttons of set of four) buttons at the same time.
NOTE: The general instructions provided by the software may call for keyboard actions such as "Enter" and "Esc". In the case
of the S7350B WebPAD, the Stylus user should tap on the display to accept the new calibration entries and to re-cali-
brate should a set of entries be undesirable.
SYSTEM POPERTITES SETUP
1. Double-click System; System Properties window displays.
2. Select General to show system information. Click OK.
3. Select Memory to adjust unused RAM to run programs or be available for storage (by moving the arrow to the right or left).
Click OK.
4. Select Device Name to provide unique information to identify the S7350B to other computers.
5. The System Properties setup procedure is complete.
23
S7350B WebPAD™
69-1514-1
Advertisement
Table of Contents
