Honeywell RTH5100B Installation Instructions Manual page 26

Step 10. Configure Installer Setup (Cont)
12. If you do not have a number 5 on the left side of
your display, go to the next page.
13. If you have a number 5 on the left side of your
display, press the Up or Down button to select your
setting for Installer Setup Number 5 in table below.
14. After you select your setting, press the Next button
to go to the next Installer Setup Number.
INSTALLER SETUP
NUMBER
5
69-1716
Replace Batt
Service Needed
Done Next
Heating
Cycle
Rate
SETTING
UP BUTTON
DOWN BUTTON
NEXT BUTTON
26
M22062