Step 6. Mount New Wallplate to Wall (Cont)
4. Move the wallplate aside and drill holes at the
locations marked on the wall. Drill 3/16 in. holes
for drywall or 7/32 in. holes for plaster.
5. Tap the wall anchors into the drilled holes until even
with the wall surface.
DRILLED HOLES (2)
WALLPLATE
6. Position the wallplate over the wall anchors.
7. Insert the mounting screws into the wall anchors.
Check leveling, if desired, and tighten the mounting
screws.
69-1716
WALL
ANCHORS (2)
R
C
R
Y
NOT
USED
(O/B)
W
G
MOUNTING
SCREWS (2)
14
M22046