Dell PowerEdge C1100 Use Instructions page 31

Table 1-37. Sensory Device Commands
Commands
Get Sensor Type
Set Sensor Reading and Event
Status
Table 1-38 shows the LAN commands.
Table 1-38. LAN Commands
Commands
Set LAN Configuration
Parameters (Note: Parameter 9
and 25 are not supported.
Get LAN Configuration
Parameters (Note: Parameter 9
and 25 are not supported.
Suspend BMC ARP
Get IP/UDP/RMCP Statistics
Table 1-39 shows the PEF/PET alerting commands.
Table 1-39. PEF/PET Alerting Commands
Commands
Get PEF Capabilities
Arm PEF Postpone Timer
Set PEF Configuration
Parameters
Get PEF Configuration
Parameters
Set Last Processed Event ID
Get Last Processed Event ID
Alert Immediate
PET Acknowledge
NetFn CMD
S/E 2Eh
S/E 2Fh
NetFn CMD
Transport 01h
Transport 02h
Transport 03h
Transport 04h
NetFn CMD
S/E 10h
S/E 11h
S/E 12h
S/E 13h
S/E 14h
S/E 15h
S/E 16h
S/E 17h
O/M
O
M
O/M
M
M
O
O
O/M
M
M
M
M
M
M
M
M
Using the Baseboard Management Controller
Supported
No
Yes
Supported
Yes
Yes
No
No
Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
31