The TeraStation's Ethernet port will automatically adjust to use either a Crossover or Patch cable,
so you may connect the TeraStation to your network with either type of Ethernet cable. Buffalo
Technology doesn't recommend connecting the TeraStation directly to a PC.
Verify that the LINK/ACT LED on the front of TeraStation is lit (see page 6's picture). If it's lit, go to
page 8 to continue setting up TeraStation. If the LINK/ACT LED is still not lit, try the suggestions
below to verify that you're not suffering from common setup problems.
Having problems? Make sure that:
•
the TeraStation and the router, hub or switch are both powered on,
•
the Ethernet cable is securely plugged in at both ends, and
•
the Ethernet cable is not damaged. Verify this by trying a different Ethernet cable.
If problems persist, contact our 24/7 technical support at (866) 75-610 (USA & Canada only).
Technical Support in Europe is available between the hours of 9am - 6pm (GMT) Monday through
Thursday and 9am-4:30 pm (GMT) Friday for this product. Customers in Europe can obtain
Technical Support using the following information: Email: helpdesk@buffalo-technology.ie | Web:
www.buffalo-technology.com
TeraStation Quick Setup
7