Buffalo TS-0.6TGL User Manual page 31

Disk Management (RAID Configuration)
A configured RAID array may be deleted by pushing
the Delete RAID Array button. This will free up all
hard drives listed under Disk Structure.
To configure an unconfigured array, put checks next
to the hard disks you want included in the array
(under Disk Structure) and choose your RAID mode.
Click Setup RAID Array when ready. It may take
several minutes to complete setting up the RAID
array. When it's finished, a Disk Scan will run, this
may take several hours to complete; performance will
be slow during the Disk Scan.
1
Advanced Settings