Mounting The Camera - Bosch LTC-0455-61 Installation Manual

LTC 0435 & LTC 0455 | Installation Manual
2. Turn the back focus adjustment as required. (See Note 1).
3. Lock the back focus locking button.
Notes:
1. To optimize picture sharpness in
both bright and low-level lighting, it
is recommended to adjust the back
focus when carrying out the set-up
procedure. The camera's unique
'Lens Wizard' allows focusing at
maximum lens opening to ensure that the object of interest
always remains in focus.
2. When back focusing vari-focus lenses, it must be possible to
obtain a sharp picture in both wide-angle and tele positions, and
for both far and near focus.
3. When back focusing zoom lenses, ensure the object of interest
remains in focus throughout the entire zoom range of the lens.
(See Advanced Set up).
CAUTION
Do not point the camera/lens into direct sunlight. When
viewing an outdoor scene, a video- or DC-iris lens is
recommended.

MOUNTING THE CAMERA

The camera can be mounted from
the top or bottom.
Note:
The BOTTOM mounting is
isolated from ground.
Bosch Security Systems | 2004-12 | Version 3
EN | 8