Specifications - Behringer C-4 User Manual

STUDIO CONDENSER MICROPHONES C‑4
Transducer type
Polar pattern
Connector
Open circuit sensitivity (@ 1 kHz)
Frequency response
Level attenuation
Low-cut filter
Max. SPL (≤ 1 % THD @ 1 kHz)
Nominal impedance
Load impedance
Supply voltage
Supply current
Dimensions
Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice. Specifica-
tions and appearance may differ from those listed or illustrated.
Technical specifications and appearance are subject to change without notice. The information contained
herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suf-
fered by any person who relies either wholly or in part upon any description, photograph or statement
contained herein. Colors and specifications may vary slightly from product. Our products are sold through
authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely
no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual
is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording of any kind, for any purpose, without
the express written permission of BEHRINGER International GmbH.
ALL RIGHTS RESERVED. © 2008 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-
38, 47877 Willich-Muenchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
11.

Specifications

condenser, 16 mm (0.63'')
cardioid
gold-plated balanced XLR connector
-38 dBV (0 dBV = 1 V/Pa)
20 Hz to 20 kHz
-10 dB, switchable
6 dB/oct. @ 120 Hz (switchable)
136 dB
75 Ω
> 1 kΩ
+48 V
3 mA
Æ shaft: 0.9", length: 3.7" (Æ shaft: 23 mm,
length: 94 mm)
approx. 0.1 lb. (approx. 0.06 kg)
Specifications
5