Download Print this page

Specifications - Behringer T-47 User Manual

Tube condenser
Hide thumbs Also See for T-47:

Advertisement

TUBE CONDENSER MICROPHONE T‑47
Transducer type
Polar pattern
Preamplifier
Output (PSU-T)
Open circuit sensitivity
Frequency response
Level attenuation
Low-cut filter
Max. SPL (3 % THD @ 1 kHz)
Dynamic range
Nominal impedance
Load impedance
Supply voltage
MAinS voLTAge / FUSe
100-120 V~, 50/60 Hz
220-230 V~, 50/60 Hz
Mains connector
Dimensions
Weight (net)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice. Specifica-
tions and appearance may differ from those listed or illustrated.
Technical specifications and appearance are subject to change without notice. The information contained
herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be
suffered by any person who relies either wholly or in part upon any description, photograph or statement
contained herein. Colors and specifications may vary slightly from product. Our products are sold through
authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely
no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual
is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording of any kind, for any purpose, without
the express written permission of BEHRINGER International GmbH.
ALL RIGHTS RESERVED. © 2008 BEHRINGER International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany. Tel. +49 2154 9206 0,
6
8.

Specifications

condenser, 16 mm (0.63'')
cardioid
vacuum tube (12AX7)
gold-plated balanced XLR connector
-40 dBV (0 dBV = 1 V/Pa)
20 Hz to 20 kHz
-
12 dB/oct. @ 100 Hz (switchable)
130 dB
110 dB
approx. 200 Ω
>1 kΩ
adapter BEHRINGER PSU-T
T 250 mA H 250 V
T 125 mA H 250 V
standard IEC receptacle
Æ shaft: 2.4", length: 8.5" (Æ
shaft: 62 mm, length: 215 mm)
approx. 1 lb. (approx. 0.47 kg)
Fax +49 2154 9206 4903
Specifications

Advertisement

loading