Table of Contents
Advertisement
8 Programming additional delay in the macro is sometimes necessary. Each macro step usually takes some
time, so there may be enough built in delay for the television and the receiver to both be fully active by
the time the input commands are sent. Sometimes the component is not fully awake. It is fashionable for
many modern televisions and receivers to require 5 or more seconds of warm up time before they are
responsive to new commands. In a case like that, you will need to add more delay between steps.
Select the Delay icon
The new step appears in the list.
TIP - Sometimes a change in order can provide the delay you need.
Programming Tutorial
Type in Section Title
Now, click on the preset amount of delay or enter any time between .1
second and 30 seconds in the "Customize" window.
Now, drag the delay step to the correct location.
B K
&
S
B
IMPLY
ETTER!
35
T
H
E
B
&
K
A
U
T
O
M
A
T
E
D
H
O
U
S
E
Advertisement
Table of Contents
