Table of Contents
Advertisement
3 Brand - If B & K, select between Home Theater, Zone ID, Multi-Zone Receivers (CT610/310/600) or
B & K ALL commands. If another brand, select the company that made the component (i.e. Sony, Panasonic etc.)
4 Model - Select the Model or the Code Set number (sometimes the actual model, sometimes a generic #
assigned by us to a code set that operates many models over the years).
1
2
3
WARNING! USE B&K MULTIZONE 128 ONLY FOR BASIC SYTEMS!!!
5 Test the Code Set
A.Verify the CK1.2 Keypad is connected to the PC and an emitter attached to the component.
B.Turn the component ON.
C. Click on the Test button.
D. Observe the component. If it stays
on, click on another Model and con-
tinue until you find the Code Set that
turns the component off. When it
turns off, click on Save.
E. After you find the correct Code Set,
click on SAVE. When you do, the
LCD Button Editor window pops
open. You can correct any labels that
you think could be more user friendly.
Feel free to rearrange buttons as you
wish. Moving LCD buttons with the
LCD button Editor is exactly like moving Devices, simply click and drag to an empty location. Once
you are reasonably satisfied with the arrangement, click on the Apply button.
6 Continue with the rest of the devices you need, using the Next Device button to move to the next device
(or manually picking them from the Device list box).When you have finished all of your devices, click on
the Close button.
Programming Tutorial
Type in Section Title
4
B K
&
S
B
IMPLY
ETTER!
6
5
21
T
H
E
B
&
K
A
U
T
O
M
A
T
E
D
H
O
U
S
E
Advertisement
Table of Contents
