Using On-Board Sirius Satellite Source Controls; Setting Direct Access To A Specific Channel Or Category - AMX DAS-MI-0404 Operation/Reference Manual

Source Controls

Using On-Board Sirius Satellite Source Controls

The Audio Source Controls enable you to control an internal Mi-Series Sirius source. You can select a
specific channel or select a category and then select the channel. After selecting a Sirius channel, the
audio plays in the selected room.
FIG. 7 On-Board Sirius Source Control
1. Click the room.
2. Click the Sirius source tab.
3. Click the UP/DOWN button to access the next/previous Channel.
4. To advance through the System presets, click the RIGHT / LEFT button.
5. The ROUND button is not used.
6. Click the Category buttons to switch between next and previous Category

Setting Direct Access to a Specific Channel or Category

1. To select a specific channel, key in the channel number and click Enter (Ex. 6Enter = Channel 6).
2. To select a specific category, key in the category number, plus dot, plus 0, and click Enter. This will
select the category and the first channel within that category. (Ex. 1.0Enter = 1st channel in
Category 1).
If you select a channel or category number but do not click the Enter button, the
Sirius source will remain on the current channel.
12 Mi-Control Mi-Series Configuration Software