Searching for Available Controllers
Searching locates Mi-Series controllers that connected to the network after you opened Mi-Control.
FIG. 1
Controller Selection Window
1. To locate connected controllers, on the Controller Selection window, click Search. Connected
controllers display in the Available Controllers list.
Controller Network Status
The Mi-Control Controller Selection window displays the IP Address and the current network status of
controllers. The table below shows the possible status values.
Controller Network Status
Status
Failed
Handshaking
Connected
A controller can only be used when its status is Connected. Otherwise, the Select
button will be disabled.
Mi-Control Mi-Series Configuration Software
Description
The controller has stopped communicating. If this happens, check that your computer's
network connection is working, and that the controller is powered on and properly
connected to the network.
Mi-Control is negotiating a connection with the controller.
Mi-Control has established a connection with the controller.
Overview
3