Announce Only Mode - AT&T E5860 User Manual

ATT-5860CIB-d2.qxd 1/3/2004
A
"A" is displayed when Announce
Only is activated
1
MENU
"Change
Announce Only"
2
CHANGE
"Off"
3
CHANGE
"On"
4
(Play/Stop)
Beep
(Option selected)
11:15 AM Page 33
Answering System Operation

Announce Only mode

In Announce Only mode, callers hear an announcement
but cannot leave messages. This option is useful, for
example, to notify callers that you will be away for an
extended period and request that they call back after a
certain date.
To turn Announce Only on or off
Press repeatedly until you hear "Change
MENU
Announce Only." Then press
the option you want (On or Off). Press
store your selection and exit, or press
modify other features (see page 34).
To record your outgoing announcement
When Announce Only is turned on, calls are answered
with a pre-recorded announcement that says "We're
sorry, messages to this number cannot be accepted."
You can use this announcement, or replace it with a
recording of your own voice.
After turning on the Announce Only feature, follow the
steps on page 32 to record your announcement. Callers
will hear this announcement only when the Announce
Only feature is turned on. Otherwise they will hear the
standard announcement asking them to leave a message.
33
until you hear
CHANGE
to
PLAY/STOP
again to
MENU