Remote Access Commands - AT&T 1485 User Manual

91-5418-10-00_att1485_r4

REMOTE ACCESS COMMANDS

FUNCTION:
Play messages in
a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
¥
3 4
2003.6.11 10:24 AM
NOTE: If 10 seconds goes by with no keys being pressed then the Voice
Menu will begin. Once the Voice Menu has finished,if no key is pressed
after 20 seconds than the remote access call will end automatically.
Page 34
COMMAND:
Press , then the appropriate mailbox
number ( , , or ). The system plays
new messages. If there are no new
messages,the system plays old messages.
Press while message is playing;
Press to back up another
message.
Press while message is playing;
each press advances another message.
Press .
Hang up.
Press while message is playing.
Press ; system plays announcement,
then beeps.
Press ; after beep, record
announcement, press
System plays back announcement.
Press ; then mailbox number where
you want memo recorded;speak after
beep;press to exit.
Press .
Press ; the system announces,
"Machine off." Press
the system back on.
When system is off,it answers after 10
rings and announces,"Please enter your
remote access code." then enter your
remote access code.
to stop.
again to turn