AT&T 1485 User Manual page 43

91-5418-10-00_att1485_r4
TELEPHONE OPERATION
PROBLEM
If you lose a call after
changing channels:
PROBLEM
If you are unable
to operate special
telephone services
or other equipment
requiring touch tone
signals:
PROBLEM
If you have difficulty
reading the base LCD
ANSWERING SYSTEM
PROBLEM
If messages are
incomplete:
PROBLEM
If you have difficulty
hearing message:
4 0
2003.6.11 10:24 AM Page 40
SOLUTION
You were probably almost out of range.
Move closer to the base before changing
channels. Before placing another call,set
the handset in the base for at least 15
seconds.
SOLUTION
If you have dial pulse (rotary) service,
follow the directions under "Temporary
Tone Dialing" in the TELEPHONE
OPERATION section of this manual.
SOLUTION
Press
SOLUTION
• If a caller leaves a very long message,
part of it may be lost when the system
disconnects the call after four minutes.
• If the caller pauses for more than seven
seconds,the system stops recording and
disconnects the call.
• If the system's memory becomes full
during a message, the system stops
recording and disconnects the call.
SOLUTION
Check the volume setting.
on the base.