Appendix A: Wireless Adapter Configuration - 2Wire 802.11g USB Wireless Adapter Installation Manual

Appendix A: Wireless Adapter Configuration

Now that you have installed the drivers for your wireless adapter, you must
configure it to work with the 2Wire gateway. A wireless network requires a network
name (SSID) and an encryption key to operate. Every 2Wire wireless gateway
comes with a unique network name and encryption key printed on the bottom of
the unit.
With the 2Wire Wireless Installation CD in your CD-ROM drive, click
1.
the Windows Start button. In the Open field, enter D:\setup.exe and click
If your CD-ROM drive is not located on D:, substitute the appropriate letter (for
example, E:\setup.exe).
When the Driver and Utilities program page displays, click the
2.
Wireless Adapter
button.
from
Run
.
OK
Configure 2Wire
12