Cable Your N600 Wireless Modem Router; Verify The Cabling - NETGEAR DGND3700 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700

Cable Your N600 Wireless Modem Router

WARNING:
DO not stack equipment, or place equipment in tight spaces, or in
drawers. Be sure your equipment is surrounded by at least
2 inches of air space. The unit should not be wall mounted.
The installation guide that came in the box has a cabling diagram on the first page.
Connect to ADSL
if connecting directly
to a DSL line.
Internet
Note:
Add an ADSL filter for every
telephone on the same phone line
as your wireless modem router.
Step 1:
Connect to Internet with ADSL or Ethernet WAN.
Internet
Connect to Ethernet WAN
if connecting to a
fiber/cable modem.
Figure 7. Cabling diagram
CAUTION:
Incorrectly connecting a filter to your wireless modem router blocks your
ADSL connection.

Verify the Cabling

Verify that your router is cabled correctly by checking the wireless modem router LEDs. Turn
on the wireless router by pressing the Power On/Off button on the back.
• The Power LED is green when the modem router is turned on.
• The LAN port is green when a PC is cabled to the router by an Ethernet cable.
• The Wireless LEDs are lit when the modem router is turned on.
Phone cable
Line
Ethernet cable
Power On/Off
Fiber/Cable modem
Hardware Setup
20
Step 2:
Cable your computer.
Ethernet cable
(not included)
Power adapter
N600 Wireless Modem Router
Note:
Keep the DGND3700
N600 Wireless Modem Router
in a vertical position.
Step 3:
Power on your router.
Wait until the 2.4 GHz
Wireless LED turns solid
green.
Laptop or desktop
computer
2.4 GHz
Wireless LED
N600 Wireless Modem Router