N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
3.
Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
and the Step 3 of 3 screen displays.
4.
Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this
tunnel, and click Next.
The VPN Wizard Summary screen displays:
To view the VPNC-recommended authentication and encryption settings used by the
VPN Wizard, click the here link.
5.
Click Done on the Summary screen.
The VPN Policies screen displays, showing that the new tunnel is enabled.
Virtual Private Networking
103