Installation; Hardware Installation - LG BE14NU40 Owner's Manual

Installation

Hardware Installation

Connecting to computer
To AC wall
outlet.
USB 3.0 Converter
cable
NOTES
• Please do not connect the AC adapter and USB 3.0 converter cable by any means
other than specified above.
• For optimal performance, using the 'USB Booster Program' in the Software CD is
recommended when you connect the USB cable.
NOTES
• Make sure you have a personal
computer with an open USB port before
connecting the drive to your computer.
• Power for all device should be turn off
before attaching the cables.
Connect the drive to the computer as
shown in figure.
1. Connect the USB converter cable to
the External Drive.
2. Connect the other end of the USB
converter cable to your computer.
3. Connect the AC adapter plug to the
power connector at the rear of the
drive.
Attach the AC adapter to the AC wall
outlet.
4. Make sure the power switch is turned on.
When the computer is ready, confirm
that the drive is detected. And then,
insert the supplied software CD into
the External Drive and install the
software.
6