Download  Print this page

LG BP06LU10 Quick Setup Manual

Bp06 series slim portable blu-ray writer
Hide thumbs
   

Advertisement

Installation

Hardware Installation

NOTES
• Please pay attention to handling Electrostatic
Sensitive Devices, you may use anti-static
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.
• Make sure you have a personal computer with
one or two open USB ports before connecting
the drive to your computer.
• Power for all other devices should be turn off
before attaching the cables.
Connecting to computer
Connect the drive to the computer as shown in
figure.
1 Connect the USB 2.0 (Y type) cable to
the drive.
2 Connect the other end of the USB 2.0
cable to your computer.
3 The drive may get its power from the PC
USB power. All systems may not meet
USB power requirements and full
performance may not be achieved.
In this case, connect to the USB power
cable.
When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the drive and install the
software.
NOTES
• Please do not connect the USB cables by any means other than specified above.
Using the wrong type of cable with this drive can cause it to malfunction.
• The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.
1
2
3
USB Power cable

Advertisement

Table of Contents
loading

  Related Manuals for LG BP06LU10

  Summary of Contents for LG BP06LU10

  • Page 1: Hardware Installation

    Installation Hardware Installation NOTES • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer.
  • Page 2: Location And Function Of Controls

    Location and function of controls This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front 1. Disc Tray 2. Drive activity indicator The LED is used to indicate the operation of drive.
  • Page 3: System Environment

    We recommend to use USBFast Software in Software Installation disc for better performance. Please visit www.lgservice.com and install the program, “LG ODD Online F/W update.” By using the program, you can automatically check the latest information about FirmWares and update the FirmWare.
  • Page 4: Safety Instructions

    AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à l’humidité (risques d’incendie et d’électrocution). EU Conformity Notice LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.

This manual is also suitable for:

Bp06lu11Bp06nu11