HP P3410A - NetRAID 1M RAID Controller Read This First page 4

Option: Experienced users may press <Ctrl> <M> for HP NetRAID Express
Tools now.
NOTE
HP NetRAID Express Tools will start after all the system BIOS POST completes.
1. Refer to the HP NetRAID Series User Guide, step C in Chapter 4 (titled "HP NetRAID Express Tools"),
to complete the following tasks. (Note: This document can be found on the included HP Netserver
Online Documentation CD-ROM, version D.24.00 or on the HP website.)
2. Exit HP NetRAID Express Tools.
E. Installing the HP NetRAID Series Software (New Install or Update)
Complete installation of the NetRAID-1M/2M by installing the NetRAID-1M/2M driver and OS specific utility. The
HP NetRAID Software Library CD that is included with the accessory kit and the HP website are the only sources for
downloading the newest release of driver and utility. Do not install the NetRAID-1M/2M software from the HP
NetServer Navigator CD as instructed by the HP NetRAID-1M and NetRAID-2M Installation and Configuration
Guide.
1. Download the NetRAID-1M/2M OS specific driver from either the HP website or the HP NetRAID Software
Library CD. Follow the OS specific instructions for driver installation as provided by your OS supplier.
2. (Update only) Uninstall the current version of the NetRAID-1M/2M utility.
3. Download the NetRAID-1M/2M OS specific utility from either the HP website or the HP NetRAID Software
Library CD. Follow the directions from step K in chapter 6 of the HP NetRAID-1M and NetRAID-2M
Installation and Configuration Guide to install the utility on the HP server.
4. Complete step L in chapter 6 of the HP NetRAID-1M and NetRAID-2M Installation and Configuration
Guide, if needed.
NOTE The minimum requirement for installation of the Microsoft Windows NetRAID-1M/2M Utility
(NetRAID Assistant) is Windows NT4 with Service Pack 4 or Windows 2000 with Service Pack 2a
and Internet Explorer 5.0
HP Part Number 5990-4053
Printed in June 2002
Page 4 of 5
Define the arrays and logical drives using either the New Configuration or Easy
Configuration option from the Configure menu of HP NetRAID Express Tools.
Initialize the logical drives using the Initialize option from the HP NetRAID Express Tools
main menu.
HP NetRAID-1M and NetRAID-2M Installation Update Sheet
*5990-4053*