Dell PowerEdge 6800 Information Update page 9

Table 1-3. LCD Status Messages
Line 1 Line 2
Message Message
SYSTEM SYSTEM NAME
ID
OVRFLW CHECK LOG LCD overflow message.
E0000
E1000 FAIL SAFE
E1000 MISCONFIG
E0119 TEMP AMBIENT
E0119 TEMP PROC #
Causes
SYSTEM ID is a unique name,
five characters or less, defined by
the user.
SYSTEM NAME is a unique
name, 16 characters or less,
defined by the user.
The system ID and name display
under the following conditions:
• The system is powered on.
• The power is off and active
POST errors are displayed.
A maximum of three error
messages can display sequentially
on the LCD. The fourth message
displays as the standard overflow
message.
Failsafe event.
Missing or improperly installed
VRMs.
Ambient system temperature
is out of acceptable range.
The specified processor is out
of acceptable temperature range.
Corrective Actions
This message is for information
only.
You can change the system ID
and name in the System Setup
program. See your User's Guide
for instructions.
Check the SEL for details on the
events.
Capture the event log and see
"Getting Help" in your
Installation and Troubleshooting
Guide.
See "Installing a Processor VRM"
in your Installation
and Troubleshooting Guide. If
the VRMs appear to be properly
configured and installed, see
"Getting Help" in your
Installation and Troubleshooting
Guide.
See "Troubleshooting System
Cooling Problems" in your
Installation and Troubleshooting
Guide.
See "Troubleshooting System
Cooling Problems" in your
Installation and Troubleshooting
Guide.
Information Update
7