Removing A Host Adapter; Swapping A Host Adapter - Dell PowerEdge 6350 User Manual

BIOS Support For Bootable CD-ROM — This option determines whether the
host adapter BIOS provides support for booting from a CD-ROM drive. The
default is Enabled.
BIOS Support For Int13 Extensions — This option determines whether the
host adapter BIOS supports disks with more than 1024 cylinders. The default is
Enabled.
This section provides the following information about installing the Dell SCSI drivers
for Windows NT Server and Windows NT Server, Enterprise Edition:
Installing the SCSI drivers

Removing a host adapter

Swapping a host adapter

Troubleshooting a configuration if Windows NT fails to boot
NOTE: Refer to Dell's Microsoft Windows NT Server 4.0 Operating System Quick
Installation Guide or Microsoft Windows NT Server, Enterprise Edition 4.0 Installation
Information for instructions for installing or reinstalling the Windows NT operating
system on your server. The following procedures focus specifically on the installation
of SCSI drivers.
The Windows NT driver diskettes you create for the Microsoft Windows NT Server
operating system contain a number of files needed for driver installation. The follow-
ing files are included on the diskettes:
aic78u2.sys — Adaptec's driver for the 7890 SCSI controller and the
AHA-2940U2W host adapter for Windows NT
aic78xx.sys — Adaptec's driver for the 7860 SCSI controller for Windows NT
oemsetup.inf — A file used by Windows NT Setup for driver installation
readme.txt — A text file describing the Adaptec 78 xx driver for Windows NT
If you have an optional RAID controller, you will also be using the pedge.sys file, the
Windows NT driver for the RAID controller. Depending upon the RAID controller you
have, the driver may be on the Dell Server Assistant CD or on a separate diskette
included with the shipment.
Installing and Configuring SCSI Drivers 3-9