Dell PowerEdge 6350 User Manual page 54

3-22 Dell PowerEdge 6350 Systems User's Guide
The aha2940.ham driver module fully supports removable-media disk drives, includ-
ing magneto-optical drives. Removable media is treated as a standard SCSI hard-disk
drive, with the following exceptions:
The driver only recognizes and registers media with 512 bytes per sector.
IntranetWare allows you to mount or dismount the media and lock or unlock the
media.
These removable-media options are supported by IntranetWare's monitor.nlm
program.
To set up the removable media, follow these steps:
1. Load monitor.nlm to display the various options.
2. Select Disk Information.
A list of system hard-disk drives appears.
3. Select the removable-media device.
Drive status items appear as shown in Table 3-2.
7DEOH  'ULYH 6WDWXV ,WHPV
Volume Segments on Drive
Read After Write Verify
Drive Light Status
Drive Operating Status
Removable Drive Mount Status
Removable Drive Lock Status
1
Valid for both removable and nonremovable SCSI drives
2
Valid for removable media only
The Read After Write Verify option (menu option 2) is set to Hardware Level by
default. This option cannot be specified in the startup.ncf or autoexec.ncf file. The
available options are defined in Table 3-3.
1
1
1
1
2
2
Select for a list
Hardware Level
Not supported
Active
Mounted
Not Locked