Edelbrock 3550 User Manual page 18

The Throttle Position sensor attaches to the harness with
Connector J8.
The Coolant Temperature sensor attaches to the harness
with Connector J10.
Only the fuel injector connectors are identical, but they are placed in
logical sequence. Refer to the diagram when installing the harness
connectors to the fuel injectors. In addition to the Main System Harness,
the Pro-Flo system includes these shorter harnesses:
A. IAC to Main System Harness
B. Ignition amplifier to distributor
C. Fuel pump to Main System Harness
Rev. 10/05
The Manifold Absolute Pressure sensor attaches to the
18
Pro-Flo EFI Installation Instructions
harness with Connector J9.
The Manifold Air Temperature sensor attaches to the
harness with Connector J11.
©2005 Edelbrock Corporation
Brochure No. 63-0115