Replacing A Cooling Fan - Dell PowerEdge 2650 Replacement Manual

Replacing a Cooling Fan

CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your System
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
Lower the fan into the retention base until the fan snaps into position. See Figure 2.
1
Replace the cover.
2
Align the cover with the cover alignment hooks on the sides of the chassis, and
a
slide the cover forward. See Figure 1.
Tighten the three thumbscrews that secure the cover to the chassis.
b
Replace the bezel, if applicable.
c
____________________
Information in this document is subject to change without notice.
© 2002 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names
other than its own.