Selecting Resolution; Using A Network Scanner; Starting A Network Scan; Stopping A Network Scan In Progress - Epson B107011F - GT 10000 Product Information Manual

EPSON GT-10000

Selecting Resolution

As a rule of thumb for most images except line art, use a
scanning resolution that is approximately one third of your
output resolution. For example, use a scanning resolution of
up to 100 dpi with a 300 dpi laser printer, and up to 200 dpi
with a 600 dpi laser printer. For 1440 dpi ink jet printers, use
a scanning resolution of up to 300 dpi. Try a scanning
resolution of 240 dpi for 720 dpi printing.
Keep the following in mind when you choose a resolution:
The higher the resolution you select, the larger the resulting
image file will be. To keep your file size manageable, select
the lowest possible resolution that gives acceptable quality.
If you need to scan at a higher resolution, you can reduce
the size of the resulting image file by scanning only part of
the image.

Using a Network Scanner

Network scanning involves the following steps:
The scanner must be connected to the scanner server.
The scanner and scanner server must be turned on and
running EPSON Scan Server.
From the client computer, start the host application, then
start EPSON TWAIN Pro Network to establish a
connection to the scanner server. Only one client computer
at a time can connect to the scanner server.
Choose the Image Type, Resolution, and other settings you
want for your scan.
Place your first image on the document table (or in the
automatic document feeder).
Start the scan. Although this can be done from EPSON
TWAIN Pro Network on the client computer, it may be
more convenient to press the scanner's ] Start button or to
start the scan from the scanner server. Then you can scan
several images with a single trip to the scanner.
If you want to scan more than one image, place your second
image on the document table and press the scanner's
] Start button again. Repeat this step for every image you
want to scan. (The settings you chose for the first image
apply to these images too.)
7 - EPSON GT-10000
When you return to the client computer, your scanned
images appear in the host application's window. Close
EPSON TWAIN Pro Network to end your connection to
the scanner server and allow other client computers to use
the scanner.
Some applications automatically close the client
computer's connection to the scanner server
when you press the ] Start button. You can't
scan multiple images if you're using these
applications.

Starting a Network Scan

You can start a scan on your network scanner in several ways:
You can start EPSON TWAIN Pro Network on the client
computer, make your scan settings, and click the
button on the EPSON TWAIN Pro Network main
window.
You can press the ] Start button on the scanner to send the
scanned image to the client computer that is currently
connected to the scanner server.
You can click the
dialog box to send the scanned image to the client computer
currently connected to the scanner server.
IP address of
the client
computer
connected to
the scanner
server
click to start a scan from
the scanner server

Stopping a Network Scan in Progress

You can stop a scan in progress from either the client
computer or the scanner server.
To cancel a scan from the client computer, click the
button on the Progress bar.
To cancel from the scanner server, click the
at the bottom of the EPSON Scan Server dialog box.
To break the connection between the client computer and
the scanner server, click the
the EPSON Scan Server dialog box. This closes EPSON
TWAIN Pro Network on the client computer and allows
other client computers to connect to the scanner server.
1/00
button on the EPSON Scan Server
Start
Cancel
button at the bottom of
Stop
Scan
Cancel
button