Accessories And Required Tools; Removing The Refrigerator Doors - Samsung RF4287HABP User Manual

AccESSoRiES AnD REquiRED tooLS

The following accessories are included with your refigerator:
Hex wrench
required Tools (not provided)
You need the following tools to complete the installation of your refirgerator:
Philips screwdriver
(+)

REMoVing tHE REFRigERAtoR DooRS

Some installations require door removal to transport the refrigerator to its final location. Do not remove the door/
drawer if you don't need to. If you do not need to remove the refrigerator doors, go to Adjusting the Level on
page 17. If you need to remove the doors. continue below.
Before removing the door/drawer, make sure you read the following items:
Disconnect power to the refrigerator before removing the door or drawer.
wARning
• Be careful not to drop, damage or scratch the door/drawer while removing them.
• Be careful not to get injured while removing the door/drawer.
• Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
Fastener Compression fitting
Flat-blade screw- Socket wrench
driver (-) (10mm)
Compression nut
Pliers Allen wrench (3/16")
(5mm)
setting up _09