Maytag MFI2266AES Service Manual page 71

Ice and water bottom mount refrigerators
Hide thumbs Also See for MFI2266AES:
Table of Contents

Advertisement

Troubleshooting
PROBLEM
POSSIBLE CAUSES
• Ice maker switch is not ON
Ice maker is not
producing ice
• Household water supply is not
• Copper tubing has kinks.
• Water pressure is too low.
• Check freezer temperature.
• Inner fountain door is blocked or
Temp Alarm Light
• Exceeded normal operating
is flashing
• Control has been set to Sabbath
All lights on
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
• Alarm mode has been disabled.
alarm sounded
Temperatures in
• Temperature display has been set to
display look too low
reaching water valve.
frozen.
temperatures.
Mode.
Celsius rather than Fahrenheit.
WHAT TO DO
• Confirm ice maker switch is ON. See Automatic Ice
Maker, pages 12-13.
• See Connecting the Water Supply, pages 8-9.
• Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
• Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
• See Temperature Controls, pages 10 and 11. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
• Do not attempt to free the fountain door by
continuously pressing the dispenser button. Contact
qualified service technician.
• See Temp Alarm, page 11.
• See, Sabbath Mode, page 11.
• To activate audible alarms, refer to page 11.
• See Temperature display on page 10.
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents