Optoma PRO350W Datasheet

PRO350W
− Multimedia Projector
Versatile, Wide & Sharp
Small, sleek and stylish, the Optoma PRO350W provides a combination of
performance and affordability. Features such as widescreen display, 2800
ANSI lumens, contrast ratio of 3000:1, lamp life of up to 4000 hours, filter-free
design and low standby power consumption ensure that the Optoma
PRO350W will not only save money in the long run, but also present a perfect,
colorful, crisp image whether projecting a presentation or movie.
* 3D content can be viewed with DLP
connected to a computer with a compatible 3D graphics card. Please visit
www.optoma.com for more information.
Features
®
 Native WXGA DLP by Texas Instruments with BrilliantColor™ Technology
 Bright images and high contrast ratio – 2800 ANSI lumens and
3000:1 contrast ratio (full on/full off)
 Rapid power-on and shutdown – saving you time and money
 Portable at 5 lbs – convenient carrying case included

Specifications

Display Type
Single 0.65" DMD DLP Technology by
Texas Instruments
Resolution
Native WXGA (1280 x 800)
Maximum Resolution
UXGA (1600 x 1200)
Brightness (Typical)
2800 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
4000/3000 Hours (STD/Bright)
185W P-VIP
Throw Ratio
1.55 to 1.7:1 (Distance/Width)
Projection Distance
3.28' to 32.8' (1.0 to 10m)
Image Size (Diagonal)
27.2" to 300" (0.69 to 7.62m)
Aspect Ratio
16:10 Native, 16:9 and 4:3 Compatible
Offset
112%
Displayable Colors
1.07 Billion
Uniformity
85%
Audio
2-Watt Speaker
User Controls
Complete On-Screen Menu
Adjustments in 23 Languages
© Copyright 2010 Optoma Technology, Inc. DLP
respective owners. All specifications subject to change at any time.
Link™ 3D glasses when the projector is
®
Remote Control
IR Remote
Computer Compatibility
UXGA, WXGA, SXGA+, SXGA, XGA,
SVGA, VGA Resized, VESA, PC and
Macintosh Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i),
EDTV (480p), HDTV (720p, 1080i/p)
3D Compatibility
120Hz frame sequential 3D for
resolutions up to 720p, 60Hz field
sequential 3D for resolutions up to 480i
Monitor Loop Through
D-Sub 15 pin VGA Output (Functional in
Both Normal and Standby Modes)
Projection Lens
F=2.5-2.67, f=21.8-23.98mm, 1.1x
Manual Zoom and Focus
I/O Connectors
HDMI, VGA-In, VGA-Out, S-Video,
Composite Video, Stereo Audio-In,
Stereo Audio-Out and RS-232
Security
Kensington® Lock Port, Security Bar
and Keypad Lock
Projection Method
Front, Rear, Ceiling Mount, Table Top
Weight
5 lbs (2.27kg)
Dimensions (W x H x D)
11.28" x 3.98" x 7.6"
(287 x 101 x 193 mm)
Noise Level (STD/BRIGHT)
30dB/32dB
® and the DLP logo are registered trademarks of Texas Instruments. All other trademarks are the property of their
Datasheet – PRO350W
NO FILTER
REQUIRED
Keystone Correction
±40° Vertical
Horizontal Scan Rate
15.3 - 91.1 KHz
Vertical Refresh Rate
24 - 120 Hz
Operating Temperature
41 to 104°F (5 to 40°C), 85% Max
Humidity
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Power Consumption
255 Watts (Bright), 207 Watts (STD),
<1 Watt (Standby)
Standard Accessories
AC Power Cord, VGA to VGA Cable,
Remote Control, Batteries for
Remote, Carrying Case, Lens Cap,
Multilingual CD-ROM User's Manual,
Quick Start Card and Warranty Card
Optional Accessories
HDMI cable, Ceiling Mount, VGA to
Component Cable, S-Video Cable,
Composite Video Cable, RS-232
Cable and Panoview™ Series
Screens
Warranty
1 Year Limited Parts and Labor,
90 Days on Lamp
UPC
796435 41 157 2
Accessory Part Numbers
Lamp: BL-FU185A
Remote: BR-3047N
Mount: BM-5001U
Case: BK-4006
www.optoma.com