BenQ SP920 - XGA DLP Projector User Manual page 45

FUNCTION
Lamp Settings
Security Settings
Baud Rate
Test Pattern
Reset All Settings
FAQ-Image and
Installation
FAQ-Features and
Service
Current System
Status
The INFORMATION menu shows you the current operating status of the projector.
DESCRIPTION
Lamp Mode
See "Setting the lamp mode" on page 39
Reset Lamp #1 Timer
Reset Lamp #2 Timer
Once the lamp is renewed, select Reset to return the corresponding lamp
timer to '0'. See "Resetting the corresponding lamp timer" on page 49
details.
Equivalent Lamp #1 Hour
Equivalent Lamp #2 Hour
Displays the number of hours the lamp has been used. See
know the lamp hour" on page 46
calculated.
Change Password
You will be asked to enter the current password before changing to a new
one. See "Utilizing the password function" on page 25
Power On Lock
See "Utilizing the password function" on page 25
For service personnel and professional technicians use. The baud rate
should be adjusted to fit your equipment.
Displays the grid test pattern. It helps you adjust the image size and the
focus to ensure that the projected image is free of distortion.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Color Space Conversion, Language, Projector
Position, High Altitude Mode, Lamp Settings, Security Settings,
Baud Rate.
Displays possible solutions to problems you may encounter.
Source
Shows the current signal source.
Picture mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color system
Shows input system format, NTSC, PAL, SECAM, or RGB.
Lamp Mode
Shows the current lamp mode status.
Equivalent Lamp #1 Hour
Equivalent Lamp #2 Hour
Displays the number of hours the lamp has been used.
for details.
"Getting to
for details on how the total lamp hour is
for details.
for details.
Operation
for
45