Adjusting The Sound - BenQ SP890 User Manual

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See
page 17 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU on the projector or MENU/EXIT on the remote control to open the OSD menu and press
/ to highlight the Advanced Setup menu.
2. Press to highlight Audio Settings and press ENTER. The Audio Settings page is displayed.
3. Highlight Mute and press
Adjusting the sound level
To adjust the sound level, press VOLUME+
1. Repeat steps 1-2 above.
2. Press to highlight Volume and press
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1-2 above.
2. Press to highlight Power On/Off Ring Tone and press
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the Power On/Off Ring Tone.
36 Using the projector
/ to select On.
VOLUME- on the remote control, or:
/
/ to select a desired sound level.
"Connecting with video equipment" on
/ to select Off.