Input Button; Displaying The Picture - Hitachi CP-RX78 Operating Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
2. Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to select
an input signal. Press the VIDEO button for
selecting an input signal from the VIDEO
port, or the COMPUTER button for selecting
an input signal from the COMPUTER IN port.
3. Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
Use the zoom ring to adjust the screen
4.
size.
5. Use the focus ring to focus the picture.
CAUTION
other method of blocking the projection light, such as attaching something to
the lens or placing something in front of the lens, may cause the damage to the
projector.
NOTE The ASPECT button does not work when no proper signal is inputted.
in the CD.
10

INPUT button

VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
COMPUTER button
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
ASPECT button
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
ESC RESET
Zoom ring