Hitachi CP-RX78 Operating Manual page 41

INPUT menu
Item
RESOLUTION
32
The resolution for the COMPUTER IN input signals can be set on
this projector.
The RESOLUTION menu will be
displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using
Selecting AUTO will set a resolution
appropriate to the input signal.
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and
horizontal size.
The INPUT_INFORMATION dialog will be
displayed.
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
Set the horizontal (HORZ) and
vertical (VERT) resolutions using
This function may not support all
resolutions.
button. The message "ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?" appears. To save the setting, press
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
The INPUT_INFORMATION dialog
will be displayed.
(6) To revert back to the previous resolution without saving
changes, move the cursor to CANCEL on screen and press the
ENTER button.
The screen will then return to the RESOLUTION menu
displaying the previous resolution.
Description
ENTER button when
STANDARD
CUSTOM
ENTER