Navigation Menu - Kyocera FS-2100DN User Manual

The Embedded Server Home Page

Navigation Menu

2-2
Home
To quickly return to this home page (top page) from any other server page,
click Home.
Select language
The embedded server supports multiple languages. To change the language
that the embedded server is displayed in, open the language drop down list
and select the appropriate language. If you attempt to view the embedded
server with a character set other than the language that is used on the
operation panel's display, some characters may be garbled.
Auto-refresh
To continuously update the embedded server's pages to the most recent
status, select the Auto-Refresh check box.
Refresh
Click this circular arrow icon to refresh the embedded server pages any time.
The navigation menu at the left of the home page divides the following functions
onto separate bars. By clicking each bar, you can jump to the desired page as
outlined below:
My Information
My Information is accessible when you have logged in to the embedded
server with a general user or administrator privilege, and user authentication
is enabled. This page summarizes the general settings to which access is
granted by the general user. This depends on the scope of the user's or
group's privileges. For example, if a user is allowed access to the document
box, he/she can add or delete documents in the document box shown in My
Information.
Device Information
This page includes this machine's various information that apply to the entire
machine, such as Device Defaults, Basic Networking as well as model,
optional equipment installed, firmware, network parameters, FAX
parameters, and information on the supported browsers.
Job Status
This page includes information on all device jobs including job status for
printing, scanning, storing, and scheduled jobs as well as the job log. After
clicking on Job Status, information is available in the following job status
pages:
Printing Job Status, Sending Job Status, Storing Job Status
Displays details on each job. You can narrow details you need by pulling
down Type. Click Refresh above to update details. Click Cancel Job to
abort the job. To see details of each job in the log, click the Number or the
Name of the job.
Scheduled Jobs (when FAX is installed)
This page is populated with FAX jobs currently scheduled for transmission.
Click Refresh to update the list. Click Cancel Job to remove the FAX job
from the list to abort.
Printing Job Log, Sending Job Log, Storing Job Log
Displays logs to track jobs of each type. You can narrow details by pulling
down Type. Click Refresh at the right end of the Top Bar to update the list of
User Guide