Dynex DX-EBUSB User Manual page 18

18
Caution: If you are using a wireless client (such as your computer equipped with a wireless
To set up WPA-PSK (no server):
Note: Choose this setting if your network does not use a radius server. WPA-PSK or
1 Select WPA-PSK or WPA2-PSK (no server) from the Network Authentication menu
on the Wireless Network Properties tab on the Edit information for a network page.
2 Select TKIP or AES from the list.
3 Enter your network key. This can be from eight to 63 characters and can be letters,
numbers, or symbols. This same key must be used on all of the clients (network cards)
that you want to include in your network.
4 Click Save to finish. You must now set all clients (network cards) to match these
settings.
USB adapter) to turn on the security settings in your wireless router, you will temporarily
lose your wireless connection until you activate security on your wireless client. Please
record the key prior to applying changes in the wireless router. If you don't remember the
hex key, your client will be locked out of the wireless router.
WPA2-PSK (no server) is typically used in home and small office networking.
Setting up your wireless network adapter