Dynex DX-E101 Quick Setup Manual page 3

Installing the driver
2 Click No, not this time, then click Next.
3 Insert the DX-E101 DC into your CD or DVD drive. The Dynex PCI
Adapter window opens automatically. Click Exit.
4 In the Found New Hardware Wizard, click Install the software
automatically (Recommended), then click Next.
Important: If a dialog box opens saying the Dynex DX-E101 PCI Fast
Ethernet Adapter has not passed Windows Logo testing, click Continue
Anyway.
Windows seraches for the drivers on the DX-101
CD and installs the drivers. When the installation
is complete, the Completing the Found New
Hardware Wizard window opens.
5 Click Finish. The driver installation is complete.
6 To set up your Windows XP network, see the instructions in the
User's Guide on the Dynex CD.
To install the driver in Windows 2000:
1 The Found New Hardware Wizard runs automatically. Click NEXT.
2 Insert the DX-E101 CD into your CD or DVD drive. The Dynex PCI
Adapter window runs automatically. Click EXIT.
3 The Install Hardware Device Drivers window opens. Click Search
for a suitable driver for my device (recommended), and then
click Next.
3