SD/MicroSD Memory Card Reader Important safety instructions Before getting started, read these instructions and save them for later reference. • Before you plug your card reader into your computer, read this user guide. In some operating systems, the driver must be installed before you install your card reader. •...
DX-CR112 Card slots This diagram shows the correct slots for the different types of media cards supported. Refer to the following section for additional details. 2 - SD/SDHC/SDXC/MMC 1 - microSD/ microSD, microSDHC microSDHC Power indicator Note: microSD cards must be inserted into this slot with the label facing DOWN.
SD/MicroSD Memory Card Reader Using your card reader To access a media card using Windows: 1 Plug the memory card reader into a USB port on your PC. 2 Insert a card into the appropriate slot, as shown in the table on page 4. A new drive icon appears in My Computer/Computer and Windows Explorer(Windows 7).
DX-CR112 To format a memory card: 1 Click Start, then click My Computer or Computer. 2 Under Removable Storage, right-click the appropriate memory card icon. 3 Select Format. 4 Type a name into the Volume Label box. The name of your memory card appears next to the icon.
SD/MicroSD Memory Card Reader If memory cards appear in My Computer/Computer (Windows operating systems) or on the desktop (Mac operating systems) but errors occur when writing or reading, check the following: • Make sure that the memory card is fully inserted into the slot. •...
DX-CR112 Legal notices FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.
Need help?
Do you have a question about the DX-CR112 and is the answer not in the manual?
Questions and answers