20-in-1 Memory Card Reader Important safety instructions Before getting started, read these instructions and save them for later reference. • Before you plug your card reader into your computer, read this user guide. In some operating systems, the driver must be installed before you install your card reader. •...
DX-CR312 Card slots This diagram shows the correct slots for the different types of media cards supported. Refer to the following section for additional details. 1 - SD/SDHC/SDXC/MMC/xD Data LED COMPACT FLASH CARD 3 - CF MS Pro MS Pro...
20-in-1 Memory Card Reader Media Card Image Details Card Slot SD/SDHC/ Insert Secure Digital card (SD, SDHC, SDXC, SDXC/MMC/ Mini SD), MultiMediaCard (MMC, MMCplus, RS-MMC) and xD picture card into this slot. Note: A memory card adapter is required for Mini SD and RS-MMC.
Page 6
DX-CR312 To remove a memory card using Windows: Caution: Do not insert or remove memory cards while the green data LED on the reader is flashing. Doing so may cause damage to your card or loss of data. 1 When you have finished working with the files on the memory card, right-click the memory card drive in My Computer/Computer or Windows Explorer, then click Eject.
20-in-1 Memory Card Reader 4 Type a name into the Volume Label box. The name of your memory card appears next to the drive. 5 Click Start, then click OK in the Warning dialog box. 6 Click OK on the Format Complete window. 7 Click Close to finish.
DX-CR312 • Some cards have a read/write security switch. Make sure that the security switch is set to Write Enabled. • Make sure that the amount of data you attempted to store has not exceeded the capacity of the card.
20-in-1 Memory Card Reader Legal notices FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.