Related Documentation - Cisco VIC-2FXS - 3600 Voice Interface Card-Fxs 2600/3600 Connection Manual

Connecting Voice Interface Cards to the Network
Figure 23
VIC-
2CA MA
Straight-through
RJ-11-to-RJ-11 cable
Connect the other end of the cable to the telephone wall outlet (RJ-11 port).
Step 3

Related Documentation

For additional information, see the following documents and resources.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Connecting the 2-Port CAMA Card
RJ-11 ports
1
SEE MAN UAL BEF ORE INST
0
ALLA TION
Low Density Voice/Fax Network Modules for the Cisco 2600, 3600 and 3700 Series
data sheet
Understanding Direct Inward Dial (DID) Voice Interface
Voice Hardware Compatibility Matrix (Cisco 17xx, 26/36/37xx, VG200, Catalyst 4500/4000,
Catalyst 6xxx), tech note
Cisco 4-Port High-Density FXS/DID Analog Voice Interface Card for the Cisco 1700 Series
Modular Access Routers, data sheet
Digital J1 Packet Voice Network
FXO, FXS, and E&M Voice Interface Card Support on Cisco 1700 Series Routers
Understanding 1-Port and 2-Port E1 Multiflex Trunk Voice/WAN Interface Cards
Cisco Digital 1-port and 2-port T1 Multi-Flex Voice
Cisco T1/E1 Multiflex Voice/WAN Interface Cards for the Cisco 1700 Series Modular Access
Routers, data sheet
Understanding E&M Voice Interface
Analog E&M Voice Signaling
Understanding and Troubleshooting Analog E & M Interface Types and Wiring
note
Understanding and Troubleshooting Analog E&M Start Dial Supervision
E&M Cable Pinouts to Connect Cisco 1750/2600/3600 E&M VIC to Nortel PBX Option 11 E&M
Trunk, tech note
RJ-11 wall jack
Module, data sheet
WICs, tech note
Cards, tech note
Overview, tech note
Related Documentation
Cards, tech note
(VWICs), tech note
Arrangements, tech
Signaling, tech note
OL-12847-01
Routers,
19