1
Load the document, and press <Scan>.
For details on loading documents, refer to
2
Press the [PC/USB] tab, and then [USB].
3
Connect the USB memory to the machine.
4
Press <Start>.
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].
•
When the message "Scan Ready" is displayed on the screen, remove the USB memory.
2-16
Scanning
"Loading
Documents".
(See page 1-31.)