Reading Area Shot Data - Eclipse CD7100 Owner's Manual

Various Settings

Reading Area Shot data

The Area Shot data that has been downloaded
from E-iSERV (web site) to a USB memory or
CD-R can be loaded into the main unit and saved
there.
Press the [CUSTOM/MENU] button
1
for more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/ Lower)
2
button to select FUNC then press
the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the AreaShot.
4
Press the [ENTER] button.
Area Shot setting mode is activated.
Press the [SELECT] (Upper/ Lower)
5
to select the Data.
6
Press the [ENTER] button.
The media selection
appear.
Press the
7
Lower) to select the Disc or USB.
8
Press the [ENTER] button.
• When selecting a CD-R:
The front panel opens automatically.
• When selecting a USB memory:
The message appears until the USB
memory is connected.
Insert the CD-R or connect
9
USB memory to be used for read
the Area Shot data.
If there are no correct files on the CD-
R or USB memory, "NO DATA" is
displayed.
44
screen
[SELECT] (Upper/
the
Press the [SELECT] (Upper/ Lower)
10
button to select the saving file.
11
Press the [ENTER] button.
The selected file will be saved.
"READING"
reading has finished, [COMPLETED]
will appear on the display and then it
will return to the display for selecting
the function mode. [NO DATA] appears
if the system is unable to read the file.
ATTENTION
• When playing a music file in USB memory,
E-iSERV data stored in the USB memory
cannot be read into the main unit.
• To load data into the main unit, you have to
make a special folder. For detail information
about how to make the folder, refer to the E-
iSERV manuals.
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
will
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [
can be operated while the system is
reading data. Disconnecting the USB
memory or ejecting CD-R stops reading
the data and the data will not be saved
in the main unit.
is displayed. When
(OPEN/EJECT)] button