Removing A Pci Express X16 Graphics Card; Installing A Pci Express X16 Graphics Card - Intel BLKDP55WB Product Manual

Intel Desktop Board DP55WB Product Guide
Figure 19. Installing a PCI Express x16 Graphics Card

Removing a PCI Express x16 Graphics Card

Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1. Observe the precautions in "Before You Begin" on page 25.
2. Disconnect the monitor cable from the graphics card back panel connector.
3. Remove the screw (Figure 20, A) that secures the card's metal bracket to the
chassis back panel.
4. Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 20, B) in the notch. This will release the card from the connector (C).
5. Pull the card straight up to remove it.
40