Canon 2918B002 On-Screen Manual page 484

Input Settings
into black and white and is rendered in two colors. The threshold level can be set with
(Threshold).
Input Size
The Paper Size is displayed before preview. After preview, the cropping frame size is displayed.
You can adjust the cropping frame (scan area) size by entering the values into
(Height).
Click (Keep Aspect Ratio) and change it to
specify the cropping frame size.
Important
Input size settings are available only when Output Size in Output Settings is Flexible. If you select
a size other than Flexible, a cropping frame calculated from Output Size and Output Resolution is
displayed, and its aspect ratio is fixed.
Note
The values you can enter will be within the range of the selected document size. The minimum
size is 96 pixels x 96 pixels when Output Resolution is 600 dpi and Enlarge/Reduce is 100%.
When Auto Crop is performed, the aspect ratio will not be maintained since the size will be
prioritized.
Adjusting Cropping Frames
See "
(Locked) to maintain the aspect ratio when you
" for details on cropping frames.
Stránka 484 z 695 stránek
(Width) and
Page top