How To Operate The Esn (Key Cd) Security; How To Program The Key Cd - Eclipse CD5435 Owner's Manual

[CD ] button

How to operate the ESN (Key CD) security

How to program the Key CD

● If a CD has already been inserted, a [SEC] message appears,
● If a security is activated, programming the Key CD is not
● If there is a problem with the inserted CD, an [ERR] message
● If a CD causes the [ERR] message to appear twice in a row, a
● Copy Protected CD and MP3/WMA CD-ROM cannot be programmed for
● The Security indicator will flash whenever the vehicle's ignition
Check that the unit is in standby.
Press and hold button [6], then the [FUNC] button,
and hold both for more than one second.
A [SEC] message appears, in two seconds it will change to
[DISC].
and then the front panel opens and the CD is ejected.
available.
Press the [CD ] button.
The front panel opens; The CD5435 is now ready for your Key
CD in the CD slot.
Insert the CD into the slot.
A [SEC] message appears, then the Key CD is ejected.
Press the [CD ] button.
The front panel closes.
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
[CHANGE] message will appear for two seconds. Try another CD.
Key CD security.
is switched off.
ESN security operating procedure
[FUNC] button
Button [6]
19