View Your Active Data Connections; Synchronization - Nokia C6-00 User Manual

Follow the instructions from your Wi-Fi
service provider.
Select from the following:
Wi-Fi network name — Select
manually or Search for
select an existing network, WLAN network
mode and WLAN security mode are
determined by the settings of its access
point device.
Network status — Define whether the
network name is displayed.
Wi-Fi network mode — Select
to create an ad hoc network and to allow
devices to send and receive data directly;
a WLAN access point device is not needed.
In an ad hoc network, all devices must use
the same WLAN network name.
Wi-Fi security mode — Select the
encryption used: WEP, 802.1x,
WPA2 (802.1x and WPA/WPA2 are not
available for ad hoc networks). If you
select Open network, no encryption is
used. The WEP, 802.1x, and WPA functions
can be used only if the network supports
them.
Homepage — Enter the web address of
the starting page.
Use access point — Set the device to
create a connection using this access point
automatically or after confirmation.
Available options may vary.

View your active data connections

Select Menu Settings
>
Connectivity Connection
>
In the active data connections view, you
can see your data connections:
data calls
packet data connections
WLAN connections
© 2010 Nokia. All rights reserved.
Enter
networks. If you
Ad-hoc
orWPA/
and
mgr..
Close a connection
Select Options > Disconnect.
Close all open connections
Select Options
>
View the details of a connection
Select Options > Details.

Synchronization

With the Synchronization application,
you can synchronize your notes,
messages, browser bookmarks, and
contacts with compatible applications on
a compatible PC or on the internet.
Select Menu Settings
>
Connectivity Data transfer
>
You may receive synchronization settings
in a special message from your service
provider.
A synchronization profile contains the
necessary settings for synchronization.
When you open the application, the
default or previously used
synchronization profile is displayed.
Create a new synchronization profile
Select Options
>
Define the features included in the
synchronization profile
Select a synchronization item to include it
in the profile or to leave it out.
Manage synchronization profiles
Select Options and the desired option.
Synchronize data
Select Options > Synchronize.
Disconnect all.
and
> Sync.
New sync profile.
53